The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in West Meade Nashville don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best Crawl Space Moisture Control In West Meade TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
DIY Basement Foundation Repair
For many homeowners, the first thought in their mind when they consider installing a crawl space waterproofing system is, "But I don't go down there! Why on earth would I do that?"
Good question! And there's a great answer. While you probably don't think about your crawl space, and you may have never even seen your crawl space, it's part of your home. What happens to it has surprising effects the rest of your house.
Water can enter into your crawl space in three different ways: through the earth (or concrete) around your home, from a plumbing leak, or through the air entering your crawl space vents. Whether this moisture enters as humidity or as an all-out leak, a wet crawl space means a headache for you. Moisture collects in anything organic - including wood floorboards, support beams, and some types of crawl space insulation. As the wood swells and warps with moisture, there are nasty results: mold, rot, mildew, bacteria, and dust mites.
What you have beneath your house is no longer a crawl space. It's a habitat. The area is filled with humidity, mold spores, and dust mites. All too soon, mice, rats, snakes, and vermin will take up residence- living and dying in the dark, wet area beneath your home. And there's nothing more attractive to a termite colony looking for a new place to live than all that damp, rotting wood!
Ignore the monster lurking below while you can, but remember that even before your rotting floor and support beams are significantly damaged, you're already being affected. Warm air in your home exits the home through your upper levels, and crawl space air is sucked up into your home. As it's pulled up, nothing is stopping the humidity, mold spores, dust mite waste, and odors coming up with it. In the summer, your air conditioners will be working overtime to remove this humidity. During the winter months, cold air vented into the home hammer away at anything it can reach- including the water heater, hot water pipes, and heating ducts.
In a vented crawl space, insulation is a Catch-22. If you don't have crawl space insulation, then there's no line of defense keeping humid summer air and cold winter air away from your floorboards. If you do have crawl space insulation, then moisture and mold can saturate the material, weighing it down and causing it to collapse on to the floor. If it's wet or lying on the ground, what can it do for your home?
The first step to solving a crawl space moisture problem is to remove any standing water issues. Left in your home, it will add humidity to the home, encourage mold and mildew, and bring pests into the room while it stagnates. It simply has to go.
If your crawl space has pooling water at any time, a reliable cast-iron crawl space sump pump is the best option. Water can be directed to the sump pump via a drainage swale, or in some cases, a modern French drain system.
Humidity pours into your house through the crawl space vents, and the damp earth and cement around your home will soak up water like a sponge, releasing water vapor into the area. Cut this problem off at the source by sealing off all crawl space vents and installing a crawl space vapor barrier. Avoid cheap solutions- the kind of product you're looking for should be strong and durable- at least 20 mil thick. A quality crawl space vapor barrier will allow access for you and service workers without tearing your line of defense. Crawl space vapor barriers should also be flexible and resistant to punctures and tears, and a bed of gravel should be laid underneath to allow water to pass underneath.
Crawl Space Repair Without a Fan or Vent
I recently came across a Consumer Reports article that served as a good reminder to homeowners about some of the home's maintenance issues that are just too important to put off. With today's economy, it is easier to justify holding off on repairing a leaking basement wall crack because it seemingly does not pose an immediate threat, outside of a little inconvenience, of course.
Problems related to the foundation's structural stability or the indoor air quality of the home requires more immediate action; such issues are essentially putting the health and overall safety of the family at risk: not tomorrow, or a year from now, but at this moment.
While bad news for the homeowner, such problems are good for basement waterproofing and foundation repair contractors - the need for their services will always exist. The Consumer Reports article lists a couple of problem issues that the homeowner should be concerned about - the growth of mold and mildew and the formation of cracks in poured foundations. As a business owner who works with the basement waterproofing industry, these are two areas of concern that I am well familiar with.
The growth of mold and mildew can occur inside a home for endless reasons. The most prominent areas are basements and crawl spaces, where excess moisture is a sure bet unless the necessary measures are taken. Concrete walls are prone to the seepage of water vapor - leaking water from cracks in the foundation or the floor adds to the problem. The basement and crawl space provides the ideal environment for trapped moisture to eventually grow into mold spores and mildew.
Concrete cracks in poured foundation walls usually occur as a result of shrinkage or settling around the foundation. Cracks forming as a result of shrinkage in the concrete typically do not pose a structural threat, yet they may cause headaches for the homeowner the second they begin to leak water.
Whether such foundation cracks are structural or not, it is best not to leave them exposed for long, as it relates to the concern of the home's indoor air quality. These cracks, as well as in concrete floors, may provide an opening for soil gases. The infiltration of soil gases, in addition to the growth of mold and mildew can be enough to create an indoor air quality nightmare. The bad air circulating inside the basement and crawl space affects the entire home - 50% of the air circulating throughout the home originates from the home's lowest level.
Concrete cracking is unavoidable. Properly addressing them early on will minimize further problems down the road. Further indoor air quality concerns may also be addressed by implementing the proper waterproofing and sealing techniques throughout the basement and crawl space. There are plenty of qualified contractors throughout the United States and Canada available to service such jobs.
It's reassuring to know that our message is backed up by an objective source such as the Consumer Reports. You view the article at the provided link, http://shopping.yahoo.com/articles/yshoppingarticles/418/5-home-repairs-not-to-ignore/.
You can't put a price on the long-term stability of the home and health of the family.
Crawl Space Masters Specializes In Crawl Space Encapsulation in West Meade TN.