The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Radnor Nashville don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best Crawl Space Repair In Radnor TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
A Closed, Sealed Crawlspace - What a Really Bad Idea
Encapsulating a crawl space is a common way to deal with moisture or flooding. It is also an easy way to quickly get control of the air quality in the home and lock out rodents and insects. When you're thinking about "green-ovating" your home, or simply getting control of the moisture or humidity, when you have a crawl space, you must encapsulate.
Encapsulation does a great deal for the crawlspace and for the home above.
What the process is and what it does
The practice of encapsulating or "sealing off" a crawlspace is done to lock out moisture and cut off the connection between moisture, water and the joists of a home. By running a vapor barrier down the walls of a crawlspace to completely cover the floor, you essential separate the outside from the inside of the home.
This vapor barrier will be the flexible membrane between the walls and floor and the rest of the home. A properly designed vapor barrier will limit the transfer of moisture through it, while regulating the speed at which air will naturally pass through. This helps to limit and control the amount of moisture that will find its way into the air space and completely segregate liquid water and direct it to a sump location.
5 helpful tips when having a Vapor Barrier installed in your crawlspace:
1.) Not all vapor barriers are made for this task - careful. There are many products out in the world that claim to be able to fully encapsulate a crawl space. Make sure that your vapor barrier has a low "perm" rate and that it is at least 14mil thick. If you're planning to use the space for storage make sure that a flexible sub-flooring product is also placed on top of the vapor barrier to protect it.
2.) Cover the walls too - all too often contractors forget to also encapsulate the walls of the crawl space when installing a vapor barrier. This can still allow water and moisture into the basement and therefore render the whole project useless. Take care to make sure it's installed properly.
3.) Don't use sprays. - Sealants and sprays aren't designed to be applied on the interior of the basement. They are good in many circumstances as the "first line of defense" but as the last, they can't hold the pressure and moisture trapped in a wall.
4.) Install a sump and a dehumidifier - to totally control the moisture level in the crawl space it's imperative that you have a sump pump and a dehumidifier installed. Moisture will still exist, although not to dangerous levels, but a sump will remove any liquid water your encapsulation traps, and the dehumidifier will deal with any residual moisture that naturally collects in the space.
5.) Look for the right contractor - many of the contractors who specialize in this repair are also in the basement waterproofing business. These contractors, over other general contractors, are preferred because they'll have access to more robust and dependable solutions. They also have the proper training and experience to pull the project off with little effort on your part.
Encapsulating a crawl space will limit moisture and humidity in your cellar and help lower your energy costs. Limiting moisture will help to ensure that any insulation in your floor boards will be working at their peak while keeping the cost of running any air conditioning units to a bare minimum.
10 Reasons to Encapsulate Your Crawl Space
When a home has sagging floors, the signs many be obvious, or they may be quite subtle. Here are some questions a home owner can ask himself to glean whether or not sagging floors is a real problem for his home.
- Does it seem that the home's floors sag towards the middle of the room?
- Does furniture slide away from walls and creep towards the middle of the room?
- Are there gaps in between the home's floor and baseboards?
- Do the home's cabinets rattle when someone walks through a room?
Many homeowners ask what causes sagging floors. Sagging floors can be caused by several factors:
- A shifting foundation beneath the home
- Floor joists in the home that have been weakened by excessive moisture
- Excessively large of spans between floor joists without enough support
- Excessive or heavy loads (furniture, gym equipment, granite) in the room(s) above a home's crawl space
- The use of temporary shims to fill flooring gaps; shims settle and shift out of place over time
The solution is more simple than it might seem! Adjustable steel crawl space supports are an economical and quick solution that can withstand the test of time. These adjustable posts are a permanent solution that work by transferring the weight of the home's flooring structure to more competent soils beneath the home. Many homeowners will attempt a do-it-yourself solution for sagging floors by inserting wooden shims to prop the floor back up. This is only a temporary band-aid and does not address the fundamental issues with the flooring structure. Shims made from wood, which are often a homeowner's first solution for the repair, can slip, shift and rot over time.
By contrast, the adjustable steel supports can be installed quickly (in less than one day), with little to no disturbance done to the property. Also, they are able to provide adequate support exactly where it is needed most. As the name implies, the supports can be adjusted in order to provide the exact amount of support needed, and they are fully compatible with a crawl space encapsulation system, should a home need that as well.
Crawl space repair is a common procedure done in many homes all over America. Unfortunately, many homeowners are unknowingly choosing temporary and insufficient means to support their homes, thinking that the professional and permanent solution will be too costly, disruptive, and time consuming. Adjustable steel crawl space supports can fix a home's sagging floors permanently without disrupting the family, the yard, or the wallet too much!
Crawl Space Masters Specializes In Crawl Space Encapsulation in Radnor TN.