waterproofing crawl space Shelbyville, Tennessee

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Shelbyville Tennessee  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

crawl space definition

The Best crawl space water In Shelbyville TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

mold in crawl space under house

Crawl Space Vapor Barriers

Crawl space is one of the most fundamental areas in every home which needs to be kept extremely clean. This is the reason why people go for crawl space encapsulation kits, as these liners make your crawl space extremely clean by keeping away insects, water logging and bad odor. However, the market displays numerous encapsulation kits in different qualities.

Good quality encapsulation kits are more expensive than the cheaper ones, but the cheaper ones are much weaker when it comes to quality. Unfortunately, in my extensive experience in this industry, I have noticed that people are attracted to cheaper ones and choose them for their encapsulation. However, they regret later when the whole thing fails to deliver what it promises.

This undoubtedly is the reason why I suggest using DIY encapsulation kits to save a considerable amount of money. How? It is not only the DIY kit that is expensive, but what's more expensive are the labor charges that come along with it. Labor charges have been increasing higher than ever, and this is the reason why it costs you as much as the encapsulation kits itself. However, if you opt for using DIY encapsulation kit you can save a considerable amount of money that you might spend on labor charges.

Moreover, you can also do your encapsulation at the convenience of your time, patience and energy. You do not have to wait for the professional to arrive at your home, analyze your crawl space and then start the job. Sometimes, this may take longer than you even expect it to finish. This undisputedly becomes the reason why people are more open to taking up DIY kit, as this can finish up their crawl space encapsulation as fast as possible.

What's more? Choosing a DIY kit will help you to ascertain the quality of your liner and the credibility it comes with when protecting your home. By choosing this kit you can take your time and choose the one that suits your preferences and is a permanent solution to your problems. If you leave this to the dealer, you cannot be sure on the quality of liners they will be using and the credibility of their service.

By doing the encapsulation yourself you can be sure that you have done it perfectly and can also alter some changes according to your preference. Hiring a professional will not only take your time and money, but may not be as flexible as you may think.

Crawl space DIY kits are readily available in the market and all you need to do is to research a bit on the types available. Remember, to choose a good quality liner because it all depends on the quality of the liner when it comes to completing the protection of your house.

mold in crawl space under house

Crawl Space Repair Without a Fan or Vent

There are three basic types of foundations in use today in the construction of a home.

Slab Foundations

A slab foundation is a foundation built directly on the soil with no basement or crawl space. Slab foundations are common in areas where soil conditions are not suitable for a basement, and are the most common foundation found in warmer areas such as Florida, Arizona, California and Texas, or anywhere where the depth between the soil and stable underlying rock is very shallow. Slabs are the quickest and cheapest foundation because they require less labor, skill and materials cost. They consist of a concrete slab that is typically 6 to 8 inches thick. Embedded within the slab is a grid of supporting ribbed metal rods known as "rebar." Even in locations where basements are prevalent, slab foundations are typically laid to serve as the base for structures like garages, pole barns, and sheds. Slabs are the least expensive of the three main foundation types but provide no storage or utility space, as the home actually sits directly on a large platform of solid concrete. Slabs have the disadvantage of being difficult and expensive to repair when they settle and crack, and plumbing lines that protrude from the soil upward through the concrete can also be expensive to repair. In areas where the underlying soil is thick or prone to excessive expansion and contraction, cables are embedded which can be tightened to provide better horizontal support and minimize the width of cracks.

Crawl Space (Pier and Beam) Foundations

A pier and beam foundation consists of either vertical wood or concrete columns (piers) that support beams or floor joists above the ground. The areas between the soil and the bottom of the house floor is known as the crawl space. These foundations are built either at ground level or over a shallow excavation that varies in depth, but is commonly about 36 to 40 inches deep. The best crawl space foundations have a load-bearing concrete perimeter wall and concrete or steel piers, both having footings below the freeze line of the soil, along with a good barrier over the soil to keep moisture under control. Less expensive versions have no load-bearing perimeter walls, piers with shallow footings, and no moisture barrier at all over the soil. Crawl spaces that enclosed by a wall or by skirting must have vents on every side to allow air to circulate and help keep the soil dry under the home. These vents must be configured to prevent the entry of rodents and snakes. Crawl space foundations are most often used in areas where there is heavy clay content in the soil that can severely damage (crack) slab foundations, or in waterfront or flood prone building sites where the necessary floor height to prevent water penetration of the living space must be higher than a slab can normally provide. The primary advantages of crawl space foundations are that plumbing lines are readily accessible for repairs, and foundation settlement problems are easier and less expensive to correct than with slab foundations. A primary disadvantage occurs when these foundations are not properly maintained or are constructed without adequate ventilation, allowing water or pests to cause damage. Crawl space foundations without adequate insulation applied to the bottom of the house floor can be very energy inefficient in a cold climate.

Basement Foundations

A basement is a type of foundation which includes an accessible space between the soil and the bottom of the first floor of a home. This foundation provides living space below the home, below the ground elevation. It is basically a slab foundation with walls and a floor. Basements are most often built in cold weather climates such as the Northeast, Midwest and Rocky Mountains, and in places where the cost of excavation is not prohibitive. Basements start with a hole approximately 8 feet deep, however, some homeowners will opt for a 9 or 10 foot deep basement wall to increase height and volume of useable space. The floor and walls are built, then the house itself is built over that. Basement foundations have the advantage of providing useful space for utilities, mechanicals systems, and storage not available in the previous two types of foundations. The primary disadvantage of basements is that because they are mostly below ground level, they are vulnerable to leakage, mold formation, and flooding. Basements in wet climates must always have a working drain and pump in the floor to combat flooding.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Shelbyville TN.

http://crawlspacemasters.com/tennessee/

Posted in Tennessee Crawl Space Encapsulation Cost and tagged , , , , , , , , , , , , , , .