Crawl Space Encapsulation Rivermont TN

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Rivermont Chattanooga  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

dry out crawl space

The Best Crawl Space Moisture Control In Rivermont TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

sealed crawl space cost

DIY Basement Foundation Repair

Many homeowners try to cut costs and increase their home's comfort level by installing a crawl space vapor barrier. This will instantly make your home healthier for you and your family, and prevent moisture damage, mold, mildew, foul smells and odors.

Most homeowners tend to look at their crawl space as separate space from their home, but in reality, the two are one. Water vapors that surface from the ground are continuously entering, creating undesirable conditions for you, your family, and your home.

Purpose

The purpose of a crawl space vapor barrier is to stop moisture and wetness from entering and affecting the floor and walls of your basement. Moisture tends to flow from warmer to colder spaces.

Many homeowners don't realize the importance of the proper installation, in order to keep moisture and water vapors from getting in the walls and floor of your basement-- condensation can lead to expensive structural damage. Also, if you can help control the moisture and dampness, you can greatly reduce the amount of energy required to cool and heat your home.

Preparation

When considering the installation of a vapor barrier, take into consideration two spaces in your home; the crawl space and the attic. Humidity tends to build in the walls of both these areas causing mold, mildew and dry rot. This can cause severe health issues for adults and children, especially for those with asthma, breathing difficulties, and allergies. In addition, it can cause severe structural damage to your home.

Some homeowners think that because they insulate the floor joists there is no need to do any additional work, but these items do not serve the same purpose!

Tips for Installation

One of the most popular do-it-yourself vapor barrier products is polyethylene, or plastic sheeting. This plastic sheeting comes in various thicknesses; 4mm, 6mm and 10mm.

With today's technology, this product is made from a high quality material, resistant to rips and punctures. Always check the soil so there aren't any objects or materials that may damage the lining. The slightest puncture, rip or tear could compromise the entire system.

Always, make sure the space is dry before you begin any repairs. To remove the moisture, you may need a dehumidifier.

Overlap the barrier a minimum of 12 inches on the side walls. Be sure it is tight. Use furring strips and masonry nails to firmly secure the lining then caulk along the joints.

Seal all the seams with a heavy duty tape. However, it is recommended not to use tapes that are not specially designed for sealing vapor barriers. When working in the basement you will be forced to contend with pipes, make the proper cuts and seal securely with tape.

The completion of your crawl space vapor barrier will be the best investment you can make in your home.

finished crawl space

Crawl Space Supports

There are advantages and disadvantages in having a crawl space under your home. Advantages, perhaps, a slightly elevated home may be more attractive than a home on a slab. Plus, you can make repairs and modifications to plumbing, heating, and electrical services.

Disadvantages, a crawl space is an area that is never cleaned. Under the vapor barrier the humidity is always 100% so mold and bacteria are always present. Termiticides, other chemicals, even rodent droppings may be present, and odors and gases that emanate will migrate into the home's living space unless proper ventilation is installed. Whether on a slab or elevated, if radon is present, good ventilation is required.

There are several technologies on the market in regard to moisture control. One is encapsulation, sealing the crawlspace. Though this might lower humidity, it's costly and there is no dilution or replacement of stagnant, poor quality air. Again, if radon is present, ventilation is required.

Another technology is to install a dehumidifier in the crawl space. This can lower humidity, but again will not dilute or replace the stagnant air. Another point to think about is that the dehumidifier will be costly to operate. More importantly, using a dehumidifier requires you to close tightly the crawl space. Thus, the home's living space air quality is going to be lowered because the crawl space air is not diluted and replaced with fresh outdoor air.

Some systems use a dehumidifier control (dehumidistat) to operate a crawl space vent fan. This sounds like it's going in the right direction. However, the technology isn't quite right. Here's why. Suppose the outdoor air is getting worse (wetter). Though the dehumidistat control is in the crawl space, it will quickly recognize this wetter air condition and begin ventilation, even though ventilating is going to make crawl space wetter. Another problem with a dehumidistat control is that most of them are not made for the difficult environment of a crawl space, so their warranties are short, 30 days to 1 year maximum for the dehumidistat.

There is another system that uses special technology different from all the others mentioned above. This special technology makes a comparison of the actual moisture content of both the air inside the crawlspace and the outdoor air. The result is that it pauses and does not ventilate when bringing in outdoor air is going to make the space wetter. Then, as the outdoor air is getting drier and is able to improve the moisture and air quality in the crawlspace, then this ventilator moves a lot of air which dilutes and replaces stagnant air, ultimately improving your home's living space air quality.

This system, called the Smartvent, is made in the USA, is used from Florida to Alaska... San Diego to Nova Scotia.

This system is a proven system, and it is the only system to have undergone a year long test where crawl space humidity averaged 46%. Besides the unique technology this system employs, it also has the longest warranty of all ventilators, five years.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Rivermont TN.

http://crawlspacemasters.com/chattanooga/

Posted in Chattanooga Waterproofing Crawl Space and tagged , , , , , , , , , .