Tennessee clean crawl space

Crawl Spaces in Tennessee  have been always around, but they became increasingly popular when homeowners started to recognize the improved convenience they have. Compared to the conventional floor setups and concrete floors, crawlspaces granted easy access to the plumbing setup and air ducts, and repairing them became effortless. Moreover, crawlspaces were also used as a storage facility. However, like any good thing in the world, crawlspaces also have its fair share of problems: trapped moisture, vermin, termites, and carpenter ants; invasion of wildlife and accumulation of foul gases to name a few.

digging out a crawl space

crawl space mold Tennessee

mold in crawl space under house

I’ve been doing  crawl space encapsulation in Tennessee for more than two decades now. A good number of correspondences I have addressed were always concerning the foul smell and bad odors that are generated from crawlspaces. It’s imperative to recognize the root causes behind such foul odors and we need to work on strategies that will eliminate the root causes. Crawlspace encapsulation is relatively a new technique which will help you to protect your crawl space, and the health of your family. However, you need to know how to choose the right encapsulation system for your home.

By encapsulating your crawl space, you no longer have to worry about rodents or other wild animals invading your crawl space, moisture accumulation, termites and foul smell that was haunting you for long. A Do-It-Yourself encapsulation kit will undisputedly help you to protect your home from unwanted disasters.

Crawl Space Encapsulation - Eliminate Musty Smells DIY - Mold Encapsulation

dry out crawl space

Crawl space is one of the most fundamental areas in every home which needs to be kept extremely clean. This is the reason why people go for crawl space encapsulation kits, as these liners make your crawl space extremely clean by keeping away insects, water logging and bad odor. However, the market displays numerous encapsulation kits in different qualities.

Good quality encapsulation kits are more expensive than the cheaper ones, but the cheaper ones are much weaker when it comes to quality. Unfortunately, in my extensive experience in this industry, I have noticed that people are attracted to cheaper ones and choose them for their encapsulation. However, they regret later when the whole thing fails to deliver what it promises.

This undoubtedly is the reason why I suggest using DIY encapsulation kits to save a considerable amount of money. How? It is not only the DIY kit that is expensive, but what's more expensive are the labor charges that come along with it. Labor charges have been increasing higher than ever, and this is the reason why it costs you as much as the encapsulation kits itself. However, if you opt for using DIY encapsulation kit you can save a considerable amount of money that you might spend on labor charges.

Moreover, you can also do your encapsulation at the convenience of your time, patience and energy. You do not have to wait for the professional to arrive at your home, analyze your crawl space and then start the job. Sometimes, this may take longer than you even expect it to finish. This undisputedly becomes the reason why people are more open to taking up DIY kit, as this can finish up their crawl space encapsulation as fast as possible.

What's more? Choosing a DIY kit will help you to ascertain the quality of your liner and the credibility it comes with when protecting your home. By choosing this kit you can take your time and choose the one that suits your preferences and is a permanent solution to your problems. If you leave this to the dealer, you cannot be sure on the quality of liners they will be using and the credibility of their service.

By doing the encapsulation yourself you can be sure that you have done it perfectly and can also alter some changes according to your preference. Hiring a professional will not only take your time and money, but may not be as flexible as you may think.

Crawl space DIY kits are readily available in the market and all you need to do is to research a bit on the types available. Remember, to choose a good quality liner because it all depends on the quality of the liner when it comes to completing the protection of your house.

5 Reasons Why Basement Waterproofing is Essential

sealed crawl space cost

For many homeowners, the first thought in their mind when they consider installing a crawl space waterproofing system is, "But I don't go down there! Why on earth would I do that?"

Good question! And there's a great answer. While you probably don't think about your crawl space, and you may have never even seen your crawl space, it's part of your home. What happens to it has surprising effects the rest of your house.

Water can enter into your crawl space in three different ways: through the earth (or concrete) around your home, from a plumbing leak, or through the air entering your crawl space vents. Whether this moisture enters as humidity or as an all-out leak, a wet crawl space means a headache for you. Moisture collects in anything organic - including wood floorboards, support beams, and some types of crawl space insulation. As the wood swells and warps with moisture, there are nasty results: mold, rot, mildew, bacteria, and dust mites.

What you have beneath your house is no longer a crawl space. It's a habitat. The area is filled with humidity, mold spores, and dust mites. All too soon, mice, rats, snakes, and vermin will take up residence- living and dying in the dark, wet area beneath your home. And there's nothing more attractive to a termite colony looking for a new place to live than all that damp, rotting wood!

Ignore the monster lurking below while you can, but remember that even before your rotting floor and support beams are significantly damaged, you're already being affected. Warm air in your home exits the home through your upper levels, and crawl space air is sucked up into your home. As it's pulled up, nothing is stopping the humidity, mold spores, dust mite waste, and odors coming up with it. In the summer, your air conditioners will be working overtime to remove this humidity. During the winter months, cold air vented into the home hammer away at anything it can reach- including the water heater, hot water pipes, and heating ducts.

In a vented crawl space, insulation is a Catch-22. If you don't have crawl space insulation, then there's no line of defense keeping humid summer air and cold winter air away from your floorboards. If you do have crawl space insulation, then moisture and mold can saturate the material, weighing it down and causing it to collapse on to the floor. If it's wet or lying on the ground, what can it do for your home?

The first step to solving a crawl space moisture problem is to remove any standing water issues. Left in your home, it will add humidity to the home, encourage mold and mildew, and bring pests into the room while it stagnates. It simply has to go.

If your crawl space has pooling water at any time, a reliable cast-iron crawl space sump pump is the best option. Water can be directed to the sump pump via a drainage swale, or in some cases, a modern French drain system.

Humidity pours into your house through the crawl space vents, and the damp earth and cement around your home will soak up water like a sponge, releasing water vapor into the area. Cut this problem off at the source by sealing off all crawl space vents and installing a crawl space vapor barrier. Avoid cheap solutions- the kind of product you're looking for should be strong and durable- at least 20 mil thick. A quality crawl space vapor barrier will allow access for you and service workers without tearing your line of defense. Crawl space vapor barriers should also be flexible and resistant to punctures and tears, and a bed of gravel should be laid underneath to allow water to pass underneath.

If you crawl space is in need of repair, Crawl Space Masters can help!


encapsulate crawl space cost Tennessee, Tennessee

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Tennessee Tennessee  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

crawlspace waterproofing

The Best crawl space mold In Tennessee TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

digging out a crawl space

Crawl Space Vapor Barriers

The crawl space has an integral role towards a home's overall value as well as the living space above. Most homeowners don't think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home's indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they unfortunately make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home's living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space - by both sealing and insulating - is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulatiing, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated, but will seal out moisture, bug infestation and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe and a ceiling heat shield.

A complete system with all of the above components will allow any soil gases - including radon gas - that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

crawl space basement

Basement Finishing Ideas For The Do-It-Yourselfer

There are three basic types of foundations in use today in the construction of a home.

Slab Foundations

A slab foundation is a foundation built directly on the soil with no basement or crawl space. Slab foundations are common in areas where soil conditions are not suitable for a basement, and are the most common foundation found in warmer areas such as Florida, Arizona, California and Texas, or anywhere where the depth between the soil and stable underlying rock is very shallow. Slabs are the quickest and cheapest foundation because they require less labor, skill and materials cost. They consist of a concrete slab that is typically 6 to 8 inches thick. Embedded within the slab is a grid of supporting ribbed metal rods known as "rebar." Even in locations where basements are prevalent, slab foundations are typically laid to serve as the base for structures like garages, pole barns, and sheds. Slabs are the least expensive of the three main foundation types but provide no storage or utility space, as the home actually sits directly on a large platform of solid concrete. Slabs have the disadvantage of being difficult and expensive to repair when they settle and crack, and plumbing lines that protrude from the soil upward through the concrete can also be expensive to repair. In areas where the underlying soil is thick or prone to excessive expansion and contraction, cables are embedded which can be tightened to provide better horizontal support and minimize the width of cracks.

Crawl Space (Pier and Beam) Foundations

A pier and beam foundation consists of either vertical wood or concrete columns (piers) that support beams or floor joists above the ground. The areas between the soil and the bottom of the house floor is known as the crawl space. These foundations are built either at ground level or over a shallow excavation that varies in depth, but is commonly about 36 to 40 inches deep. The best crawl space foundations have a load-bearing concrete perimeter wall and concrete or steel piers, both having footings below the freeze line of the soil, along with a good barrier over the soil to keep moisture under control. Less expensive versions have no load-bearing perimeter walls, piers with shallow footings, and no moisture barrier at all over the soil. Crawl spaces that enclosed by a wall or by skirting must have vents on every side to allow air to circulate and help keep the soil dry under the home. These vents must be configured to prevent the entry of rodents and snakes. Crawl space foundations are most often used in areas where there is heavy clay content in the soil that can severely damage (crack) slab foundations, or in waterfront or flood prone building sites where the necessary floor height to prevent water penetration of the living space must be higher than a slab can normally provide. The primary advantages of crawl space foundations are that plumbing lines are readily accessible for repairs, and foundation settlement problems are easier and less expensive to correct than with slab foundations. A primary disadvantage occurs when these foundations are not properly maintained or are constructed without adequate ventilation, allowing water or pests to cause damage. Crawl space foundations without adequate insulation applied to the bottom of the house floor can be very energy inefficient in a cold climate.

Basement Foundations

A basement is a type of foundation which includes an accessible space between the soil and the bottom of the first floor of a home. This foundation provides living space below the home, below the ground elevation. It is basically a slab foundation with walls and a floor. Basements are most often built in cold weather climates such as the Northeast, Midwest and Rocky Mountains, and in places where the cost of excavation is not prohibitive. Basements start with a hole approximately 8 feet deep, however, some homeowners will opt for a 9 or 10 foot deep basement wall to increase height and volume of useable space. The floor and walls are built, then the house itself is built over that. Basement foundations have the advantage of providing useful space for utilities, mechanicals systems, and storage not available in the previous two types of foundations. The primary disadvantage of basements is that because they are mostly below ground level, they are vulnerable to leakage, mold formation, and flooding. Basements in wet climates must always have a working drain and pump in the floor to combat flooding.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Tennessee TN.

http://crawlspacemasters.com/tennessee/