Wet Crawl Space Oak Hill TN

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Oak Hill Nashville  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

mold in crawl space under house

The Best Crawl Space Waterproofing In Oak Hill TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

finished crawl space

Proper Crawl Space Ventilation Can Improve Living Space Air Quality Inside Your Home

There are three basic types of foundations in use today in the construction of a home.

Slab Foundations

A slab foundation is a foundation built directly on the soil with no basement or crawl space. Slab foundations are common in areas where soil conditions are not suitable for a basement, and are the most common foundation found in warmer areas such as Florida, Arizona, California and Texas, or anywhere where the depth between the soil and stable underlying rock is very shallow. Slabs are the quickest and cheapest foundation because they require less labor, skill and materials cost. They consist of a concrete slab that is typically 6 to 8 inches thick. Embedded within the slab is a grid of supporting ribbed metal rods known as "rebar." Even in locations where basements are prevalent, slab foundations are typically laid to serve as the base for structures like garages, pole barns, and sheds. Slabs are the least expensive of the three main foundation types but provide no storage or utility space, as the home actually sits directly on a large platform of solid concrete. Slabs have the disadvantage of being difficult and expensive to repair when they settle and crack, and plumbing lines that protrude from the soil upward through the concrete can also be expensive to repair. In areas where the underlying soil is thick or prone to excessive expansion and contraction, cables are embedded which can be tightened to provide better horizontal support and minimize the width of cracks.

Crawl Space (Pier and Beam) Foundations

A pier and beam foundation consists of either vertical wood or concrete columns (piers) that support beams or floor joists above the ground. The areas between the soil and the bottom of the house floor is known as the crawl space. These foundations are built either at ground level or over a shallow excavation that varies in depth, but is commonly about 36 to 40 inches deep. The best crawl space foundations have a load-bearing concrete perimeter wall and concrete or steel piers, both having footings below the freeze line of the soil, along with a good barrier over the soil to keep moisture under control. Less expensive versions have no load-bearing perimeter walls, piers with shallow footings, and no moisture barrier at all over the soil. Crawl spaces that enclosed by a wall or by skirting must have vents on every side to allow air to circulate and help keep the soil dry under the home. These vents must be configured to prevent the entry of rodents and snakes. Crawl space foundations are most often used in areas where there is heavy clay content in the soil that can severely damage (crack) slab foundations, or in waterfront or flood prone building sites where the necessary floor height to prevent water penetration of the living space must be higher than a slab can normally provide. The primary advantages of crawl space foundations are that plumbing lines are readily accessible for repairs, and foundation settlement problems are easier and less expensive to correct than with slab foundations. A primary disadvantage occurs when these foundations are not properly maintained or are constructed without adequate ventilation, allowing water or pests to cause damage. Crawl space foundations without adequate insulation applied to the bottom of the house floor can be very energy inefficient in a cold climate.

Basement Foundations

A basement is a type of foundation which includes an accessible space between the soil and the bottom of the first floor of a home. This foundation provides living space below the home, below the ground elevation. It is basically a slab foundation with walls and a floor. Basements are most often built in cold weather climates such as the Northeast, Midwest and Rocky Mountains, and in places where the cost of excavation is not prohibitive. Basements start with a hole approximately 8 feet deep, however, some homeowners will opt for a 9 or 10 foot deep basement wall to increase height and volume of useable space. The floor and walls are built, then the house itself is built over that. Basement foundations have the advantage of providing useful space for utilities, mechanicals systems, and storage not available in the previous two types of foundations. The primary disadvantage of basements is that because they are mostly below ground level, they are vulnerable to leakage, mold formation, and flooding. Basements in wet climates must always have a working drain and pump in the floor to combat flooding.

cost to encapsulate crawl space

What to Do About Basement Waterproofing Before It's Too Late

When a home has sagging floors, the signs many be obvious, or they may be quite subtle. Here are some questions a home owner can ask himself to glean whether or not sagging floors is a real problem for his home.

  • Does it seem that the home's floors sag towards the middle of the room?
  • Does furniture slide away from walls and creep towards the middle of the room?
  • Are there gaps in between the home's floor and baseboards?
  • Do the home's cabinets rattle when someone walks through a room?

Many homeowners ask what causes sagging floors. Sagging floors can be caused by several factors:

  • A shifting foundation beneath the home
  • Floor joists in the home that have been weakened by excessive moisture
  • Excessively large of spans between floor joists without enough support
  • Excessive or heavy loads (furniture, gym equipment, granite) in the room(s) above a home's crawl space
  • The use of temporary shims to fill flooring gaps; shims settle and shift out of place over time

The solution is more simple than it might seem! Adjustable steel crawl space supports are an economical and quick solution that can withstand the test of time. These adjustable posts are a permanent solution that work by transferring the weight of the home's flooring structure to more competent soils beneath the home. Many homeowners will attempt a do-it-yourself solution for sagging floors by inserting wooden shims to prop the floor back up. This is only a temporary band-aid and does not address the fundamental issues with the flooring structure. Shims made from wood, which are often a homeowner's first solution for the repair, can slip, shift and rot over time.

By contrast, the adjustable steel supports can be installed quickly (in less than one day), with little to no disturbance done to the property. Also, they are able to provide adequate support exactly where it is needed most. As the name implies, the supports can be adjusted in order to provide the exact amount of support needed, and they are fully compatible with a crawl space encapsulation system, should a home need that as well.

Crawl space repair is a common procedure done in many homes all over America. Unfortunately, many homeowners are unknowingly choosing temporary and insufficient means to support their homes, thinking that the professional and permanent solution will be too costly, disruptive, and time consuming. Adjustable steel crawl space supports can fix a home's sagging floors permanently without disrupting the family, the yard, or the wallet too much!


Crawl Space Masters Specializes In Crawl Space Encapsulation in Oak Hill TN.

http://crawlspacemasters.com/nashville/

Basement Waterproofing Oak Hill TN

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Oak Hill Chattanooga  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

crawl space definition

The Best Crawl Space Waterproofing In Oak Hill TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

mold in crawl space under house

Crawlspace Moisture Control - The Case for Encapsulation

A basement is prone to all types of foundation issues like, cracks in the interior and exterior walls, leaks, soil pressure, excessive moisture, seepage and dampness. These problems get worse over time and cause long term damage to your home, if left untreated. In order to enhance the structural integrity of your home, it is very important to take professional help for basement foundation repair. A professional will ensure that the problem is resolved efficiently.

Many properties experience foundation issues at some or the other time and it is important to know how severe the problem is to look for a treatment that offers a permanent solution. A basement foundation repair can be easily done if you have basic information about the ways to handle such repairs. There are various methods of repairing the foundation of a home. If there is some serious damage, it is advisable to take professional help. For general maintenance, you can either go for mortar application or patching repairs.

Some indications which suggest that you should go for basement foundation repair includes:

- Uneven Floors
- Water collection
- Cracks at entry or exit doors
- Doors not closing or opening properly

Cracks are the most common type of foundation maintenance issues. They are usually found in older basements and are caused due to the changes in the soil below the basement. Shallow foundations are more prone to cracks.

How To Clean Cracks

Once you have identified cracks in the foundation, you need to first clean them comprehensively. Cleaning is important as it not only helps in knowing the type of repair required, but also helps in proper application of the adhesive material. You can use a chisel to remove loose fragments from the cracks and then inspect it to find the right repair method.

If the cracks have just begun to show, you can use either hydraulic cement or Portland mortar to seal the cracks. These materials come with easy to follow instructions and can also be used to resolve any visible unevenness along the basement floor.

If your basement foundation is facing standing water problem, the moisture seepage can cause cracks in the drywall. To patch the leaky spots is the most effective solution for dealing with this problem.

To ensure that repeated basement foundation repairs are not needed, the groundwater should be directed away from the foundation.

A professional basement foundation repair company can be hired to repair foundation cracks, basement walls, stabilize the foundation, install foundation guard, repair eroded, bowed or unstable walls and remove mold problems. A strong basement foundation increases the value of your home.

crawl space conversion

Crawl Space Supports

Outlined below are the most common 4 methods I have seen used in installing a vapor barrier. If you talk to different builders, you usually will end up with many different methods of installing a vapor barrier in a crawlspace. Here are the most common:

1. Pea Gravel on top of plastic vapor barrier - This has to be the all time dumbest thing I have ever seen, and yet it is probably one of the most common. I have had builders tell me that the plastic on the ground KEEPS ground water and moisture from coming up from the ground. Now if there is no moisture or water in the soil, this might be possible; but if that was the case there would be no need for the barrier in the first place. So here is the basic idea - ground floor (bottom) - plastic (middle) - 4" pea gravel fill (top). Once the crawl foundation is built, builders install a 4 - 6 mil plastic on the ground and dump about 4" - 6" of pea gravel on top of the plastic. Eventually, what always happens is that water comes in from the walls and the ground floor and ends up on top of the plastic. So what you end up with is a swimming pool liner that holds water in the gravel for prolonged periods of time. Nearly all the water and moisture in the gravel back fill has to evaporate into the structure. Another example of building practices and science turning a blind eye to crawlspaces for decades.

2. Vapor barrier on top of ground floor - By far the most common practice for installing a vapor barrier. A 6 mil polyethylene vapor barrier is placed over any ground floor. Here is the idea - ground floor (bottom) - plastic (top). The ground floor could be river rock, pea gravel, dirt floor, sand, etc. The seams are typically overlapped 6" - 12" and almost never taped. While this will temporarily stop some moisture evaporation, it does not seal out moisture from the internal perimeter wall where most water penetration occurs. Also moisture can come up from the seams, and the plastic is not durable enough to crawl on. It nearly always ends up with many punctures and holes in it.

3. Vapor barrier on bottom of floor joists - This is rarely seen, and usually only home owners attempt this. This is probably the method that accounts for more wood rot than any other method. If you are even thinking of doing this, quit thinking and call a professional to fix your crawlspace. Most crawlspaces are vented and the cooler surfaces such as duct work, pipes, and the floor will condensate in the summer. The plastic will trap the condensation up against the floor structure and mold and wood rot will occur. Good intentions do not always produce good results.

4. Vapor barrier fastened to sill plate - There is a new industry in crawlspace repair that encapsulates crawl spaces. The process of encapsulation is to install a heavy think plastic liner on the floor and up the foundation walls. The plastic liner is fastened and sealed to the foundation wall and all the overlapped seams are taped. Every potential gap or seam in the liner is meticulously sealed to prevent any moisture from evaporating. Then the vents are sealed in the encapsulation system to prevent hot humid air from entering in the summer. There is another system being sold and installed out there being represented as an encapsulation system, but is far from it.

This "other" system is a 6 mil plastic that is ran up the foundation walls and stapled to the sill plate. None of the overlapped seams are taped. It is basically a glorified vapor barrier on top of the ground floor being ran up the walls and stapled to the wood. They seal the vents without properly sealing the moisture from the ground floor or foundation walls. The problem with fastening plastic to the sill plate is that moisture will "wick" up the foundation wall, and moisture will absorb into the sill plate and floor joists. They are giving free access to all the moisture under the liner to rot the sill plates and floor joists. Not to mention that all the moisture will evaporate up through all of the seams that aren't taped and the plastic liner is only 6 mil and eventually will puncture and tear. Be very careful in the contractor you choose to properly encapsulate your crawlspace.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Oak Hill TN.

http://crawlspacemasters.com/chattanooga/