Home

Encapsulating a crawl space is a common way to deal with moisture or flooding. It is also an easy way to quickly get control of the air quality in the home and lockout rodents and insects. When you’re thinking about “green-ovating” your home, or simply getting control of the moisture or humidity, when you have a crawl space, you must encapsulate.

Encapsulation does a great deal for the crawlspace and for the home above.

crawlspacerepair com

What the process is and what it does

The practice of encapsulating or “sealing off” a crawlspace is done to lock out moisture and cut off the connection between moisture, water and the joists of a home. By running a vapor barrier down the walls of a crawl space to completely cover the floor, you essential separate the outside from the inside of the home.

This vapor barrier will be the flexible membrane between the walls and floor and the rest of the home. A properly designed vapor barrier will limit the transfer of moisture through it while regulating the speed at which air will naturally pass through. This helps to limit and control the amount of moisture that will find its way into the air space and completely segregate liquid water and direct it to a sump location.

finished crawl space

5 helpful tips when having a Vapor Barrier installed in your crawlspace:

1.) Not all vapor barriers are made for this task – careful. There are many products out in the world that claim to be able to fully encapsulate a crawl space. Make sure that your vapor barrier has a low “perm” rate and that it is at least 14mil thick. If you’re planning to use the space for storage make sure that a flexible sub-flooring product is also placed on top of the vapor barrier to protect it.

2.) Cover the walls too – all too often contractors forget to also encapsulate the walls of the crawl space when installing a vapor barrier. This can still allow water and moisture into the basement and therefore render the whole project useless. Take care to make sure it’s installed properly.

3.) Don’t use sprays. – Sealants and sprays aren’t designed to be applied on the interior of the basement. They are good in many circumstances as the “first line of defense” but as the last, they can’t hold the pressure and moisture trapped in a wall.

4.) Install a sump and a dehumidifier – to totally control the moisture level in the crawl space it’s imperative that you have a sump pump and a dehumidifier installed. Moisture will still exist, although not to dangerous levels, but a sump will remove any liquid water your encapsulation traps, and the dehumidifier will deal with any residual moisture that naturally collects in the space.

Proper Crawl Space Ventilation Can Improve Living Space Air Quality Inside Your Home

crawlspacerepair com

Crawl space is one of the most fundamental areas in every home which needs to be kept extremely clean. This is the reason why people go for crawl space encapsulation kits, as these liners make your crawl space extremely clean by keeping away insects, water logging and bad odor. However, the market displays numerous encapsulation kits in different qualities.

Good quality encapsulation kits are more expensive than the cheaper ones, but the cheaper ones are much weaker when it comes to quality. Unfortunately, in my extensive experience in this industry, I have noticed that people are attracted to cheaper ones and choose them for their encapsulation. However, they regret later when the whole thing fails to deliver what it promises.

This undoubtedly is the reason why I suggest using DIY encapsulation kits to save a considerable amount of money. How? It is not only the DIY kit that is expensive, but what's more expensive are the labor charges that come along with it. Labor charges have been increasing higher than ever, and this is the reason why it costs you as much as the encapsulation kits itself. However, if you opt for using DIY encapsulation kit you can save a considerable amount of money that you might spend on labor charges.

Moreover, you can also do your encapsulation at the convenience of your time, patience and energy. You do not have to wait for the professional to arrive at your home, analyze your crawl space and then start the job. Sometimes, this may take longer than you even expect it to finish. This undisputedly becomes the reason why people are more open to taking up DIY kit, as this can finish up their crawl space encapsulation as fast as possible.

What's more? Choosing a DIY kit will help you to ascertain the quality of your liner and the credibility it comes with when protecting your home. By choosing this kit you can take your time and choose the one that suits your preferences and is a permanent solution to your problems. If you leave this to the dealer, you cannot be sure on the quality of liners they will be using and the credibility of their service.

By doing the encapsulation yourself you can be sure that you have done it perfectly and can also alter some changes according to your preference. Hiring a professional will not only take your time and money, but may not be as flexible as you may think.

Crawl space DIY kits are readily available in the market and all you need to do is to research a bit on the types available. Remember, to choose a good quality liner because it all depends on the quality of the liner when it comes to completing the protection of your house.

5 Helpful Tips For When it is Time to Encapsulate Your Crawl Space

digging out a crawl space

Before you sign that independent contractor agreement, consider this:

You're hungry, and you and your special someone decide to eat out. You drive down the road and find two restaurants standing next to other. From the outside, they seem about the same with one significant difference: the parking lot in front of one restaurant is nearly empty. The other restaurant? Packed! The lot is nearly full, and there's a crowd at the door. Through the restaurant windows you see smiling faces and filled tables. You pull in, and when you're greeted at the door, you're told there will be a 45 minute wait for your table. Will you leave the restaurant and go next door to the one that can serve you immediately? Isn't there a reason the other one is empty?

If you're looking for a basement waterproofing contractor to work on your home, you've got more than a bad taste in your mouth to worry about. Symptoms of a wet basement include headaches, moldy basement carpeting, wet drywall, ruined personal possessions, spreading mold, smelly basement syndrome, fatigue after hours of cleaning, and an exhausted bank account. Don't take chances on the empty business- if you reach a basement waterproofing company with a long line, there must be an awful lot of people who think they're worth the wait.

If you're not sure if the basement waterproofing contractor you've decided to work with is the best in the business, there are many ways to check out their reputation. Visit the local Better Business Bureau web site and check out their reputation- any complaints registered with them will be public for three years. Compare them with other local dealers, taking into account the size of the businesses and how many jobs has been completed for each.

It's also a good idea to check the contractor consumer web site such as Yelp! Or Angie's List. If the local contractor is registered, then reviews, company information, and ratings for quality and service will be clearly laid out as well as anecdotal accounts created by customers of this contractor will be available. There's a lot of ways online to have a customer's feelings be heard nowadays.

As a final way to check on your basement waterproofing contractor, contact them and ask for references. Many contractors will collect references from previous jobs and will be able to connect you with testimonials and contacts that will be able to give you a personal account of the quality of their service. However, whether you check with the Better Business Bureau, Angie's List, or you're checking up on references, you'll be gathering information directly from former customers about what these basement waterproofing contractors are all about.