The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Franklin Tennessee don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best basement waterproofing In Franklin TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
10 Reasons to Encapsulate Your Crawl Space
For many homeowners, the first thought in their mind when they consider installing a crawl space waterproofing system is, "But I don't go down there! Why on earth would I do that?"
Good question! And there's a great answer. While you probably don't think about your crawl space, and you may have never even seen your crawl space, it's part of your home. What happens to it has surprising effects the rest of your house.
Water can enter into your crawl space in three different ways: through the earth (or concrete) around your home, from a plumbing leak, or through the air entering your crawl space vents. Whether this moisture enters as humidity or as an all-out leak, a wet crawl space means a headache for you. Moisture collects in anything organic - including wood floorboards, support beams, and some types of crawl space insulation. As the wood swells and warps with moisture, there are nasty results: mold, rot, mildew, bacteria, and dust mites.
What you have beneath your house is no longer a crawl space. It's a habitat. The area is filled with humidity, mold spores, and dust mites. All too soon, mice, rats, snakes, and vermin will take up residence- living and dying in the dark, wet area beneath your home. And there's nothing more attractive to a termite colony looking for a new place to live than all that damp, rotting wood!
Ignore the monster lurking below while you can, but remember that even before your rotting floor and support beams are significantly damaged, you're already being affected. Warm air in your home exits the home through your upper levels, and crawl space air is sucked up into your home. As it's pulled up, nothing is stopping the humidity, mold spores, dust mite waste, and odors coming up with it. In the summer, your air conditioners will be working overtime to remove this humidity. During the winter months, cold air vented into the home hammer away at anything it can reach- including the water heater, hot water pipes, and heating ducts.
In a vented crawl space, insulation is a Catch-22. If you don't have crawl space insulation, then there's no line of defense keeping humid summer air and cold winter air away from your floorboards. If you do have crawl space insulation, then moisture and mold can saturate the material, weighing it down and causing it to collapse on to the floor. If it's wet or lying on the ground, what can it do for your home?
The first step to solving a crawl space moisture problem is to remove any standing water issues. Left in your home, it will add humidity to the home, encourage mold and mildew, and bring pests into the room while it stagnates. It simply has to go.
If your crawl space has pooling water at any time, a reliable cast-iron crawl space sump pump is the best option. Water can be directed to the sump pump via a drainage swale, or in some cases, a modern French drain system.
Humidity pours into your house through the crawl space vents, and the damp earth and cement around your home will soak up water like a sponge, releasing water vapor into the area. Cut this problem off at the source by sealing off all crawl space vents and installing a crawl space vapor barrier. Avoid cheap solutions- the kind of product you're looking for should be strong and durable- at least 20 mil thick. A quality crawl space vapor barrier will allow access for you and service workers without tearing your line of defense. Crawl space vapor barriers should also be flexible and resistant to punctures and tears, and a bed of gravel should be laid underneath to allow water to pass underneath.
What to Do About Basement Waterproofing Before It's Too Late
In recent years, the idea of indoor air quality control has become a bigger concern to the basement waterproofing industry. When I began working with the industry over 20 years ago, the idea of basement waterproofing was exclusive to the controlling of and prevention of water seepage and flooding. With homeowners becoming more aware of radon gas infiltration, moisture and mildew, and other soil gases, waterproofers have the perfect opportunity to better serve their customers by addressing such needs.
Musty smells, moisture and radon gas - all common problems in a basement and/or crawl space, are solvable by enacting some of the most basic waterproofing techniques. Improving indoor air quality, beginning from the basement and/or crawl space will impact the air quality of the entire home. Over 50 percent of the air that circulates through the home's living space originates from the basement and or crawl space. When the air quality of the basement or crawl space is poor, chances are, the entire home's air quality is poor or soon will be.
One of the first measures a contractor can do to address such concerns is by applying a sodium based silicate spray onto the basement's walls and floors. Such a spray typically reacts with the concrete's free lime, resulting in the formation of an expanded crystalline structure beneath the surface. The application of a deep-penetrating concrete sealer stops water vapor and radon gas from permeating the porous surfaces. This allows the concrete to become dense, increasing its resistance to various vapors and gases. Such sealants usually can be applied with a low-pressure hand sprayer.
When applying the right sodium based silicate spray, some of the additional advantages may include the reduction of spalling from freeze and thaw cycles; improving a concrete structure's resistance to most soils, acids, oils and salts; and protecting against efflorescence and leaching - specific results will vary pending the type of spray that is applied.
It is recommended to clean the concrete surface prior to application. Any dirt, oil or foreign substances may hinder the effectiveness of the spray. After such a spray is applied, the surface should be flushed with water before drying.
The prevention of moisture and soil gases permeating through concrete surfaces goes a long way in reducing the growth of mold and eliminating the musty smell that often plagues a basement and/or crawl space. Waterproofing contractors have always been called to address immediate water problems for the short-term; with indoor air quality control, contractors can now offer a viable long-term service that provides their customers with the ultimate peace of mind.
Crawl Space Masters Specializes In Crawl Space Encapsulation in Franklin TN.