Crawl Space Repair Larkwood TN

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Larkwood Nashville  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

mold in crawl space under house

The Best Wet Crawl Space In Larkwood TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

finished crawl space

Crawl Space Vapor Barriers

Crawl Spaces have been always around, but they became increasingly popular when homeowners started to recognize the improved convenience they have. Compared to the conventional floor setups and concrete floors, crawlspaces granted easy access to the plumbing setup and air ducts, and repairing them became effortless. Moreover, crawlspaces were also used as a storage facility. However, like any good thing in the world, crawlspaces also have its fair share of problems: trapped moisture, vermin, termites, and carpenter ants; invasion of wildlife and accumulation of foul gases to name a few.

I've been doing crawl space encapsulation business for more than two decades now. A good number of correspondences I have addressed were always concerning the foul smell and bad odors that are generated from crawlspaces. It's imperative to recognize the root causes behind such foul odors and we need to work on strategies that will eliminate the root causes. Crawlspace encapsulation is relatively a new technique which will help you to protect your crawl space, and the health of your family. However, you need to know how to choose the right encapsulation system for your home.

By encapsulating your crawl space, you no longer have to worry about rodents or other wild animals invading your crawl space, moisture accumulation, termites and foul smell that was haunting you for long. A Do-It-Yourself encapsulation kit will undisputedly help you to protect your home from unwanted disasters.

Choosing the Right Crawl Space Encapsulation System: Things to Look For:

There are four potential threats for your crawl space: mold, water, rodents and other animals. Foul smell is a result of all these elements. Your crawl space is the natural source of fresh air but when odor is generated in this area, the fresh air entering your home will also be affected. By eliminating the root causes of odor, you can significantly improve the air quality in your home.

  • Liner: I receive several phone calls from disappointed customers who spent their hard-earned money on thin liners because some store owner advised them to do so. However, any liner material without 0.000 permeability and at least 20mil thickness won't help you to encapsulate the system and prevent water and radon gas entering your home.
  • Water: You need a waterproof encapsulation because this will help you to prevent rain water or any other source of running water entering your crawlspace. Moreover, this will also help you to bring down the moisture level, which is a good initiative in making your crawl space unsuitable for rodents and mold.
  • Dehumidifier: If you install the proper liner system, the need for a dehumidifier is greatly reduced as the purpose of removing moisture. The reason being, that a proper liner system will stop the water or moisture before it gets into the home or crawlspace, thus eliminating the need for a dehumidifier.
  • Mold Neutralizer: Dehumidifiers can prevent mold growth to a large extent, but mold neutralizer destroys bacteria, algae and mold and also prevents their future growth.

These are some important factors to be considered when installing an encapsulation system for your home. You also need to consider the warranty & price offered by your store owner. Maintaining your home can be expensive, but by investing in professional encapsulating systems that will protect your home for several decades, you're making a wise investment.

crawl space drainage

Crawlspace Vapor Barrier Installation

Many homeowners try to cut costs and increase their home's comfort level by installing a crawl space vapor barrier. This will instantly make your home healthier for you and your family, and prevent moisture damage, mold, mildew, foul smells and odors.

Most homeowners tend to look at their crawl space as separate space from their home, but in reality, the two are one. Water vapors that surface from the ground are continuously entering, creating undesirable conditions for you, your family, and your home.

Purpose

The purpose of a crawl space vapor barrier is to stop moisture and wetness from entering and affecting the floor and walls of your basement. Moisture tends to flow from warmer to colder spaces.

Many homeowners don't realize the importance of the proper installation, in order to keep moisture and water vapors from getting in the walls and floor of your basement-- condensation can lead to expensive structural damage. Also, if you can help control the moisture and dampness, you can greatly reduce the amount of energy required to cool and heat your home.

Preparation

When considering the installation of a vapor barrier, take into consideration two spaces in your home; the crawl space and the attic. Humidity tends to build in the walls of both these areas causing mold, mildew and dry rot. This can cause severe health issues for adults and children, especially for those with asthma, breathing difficulties, and allergies. In addition, it can cause severe structural damage to your home.

Some homeowners think that because they insulate the floor joists there is no need to do any additional work, but these items do not serve the same purpose!

Tips for Installation

One of the most popular do-it-yourself vapor barrier products is polyethylene, or plastic sheeting. This plastic sheeting comes in various thicknesses; 4mm, 6mm and 10mm.

With today's technology, this product is made from a high quality material, resistant to rips and punctures. Always check the soil so there aren't any objects or materials that may damage the lining. The slightest puncture, rip or tear could compromise the entire system.

Always, make sure the space is dry before you begin any repairs. To remove the moisture, you may need a dehumidifier.

Overlap the barrier a minimum of 12 inches on the side walls. Be sure it is tight. Use furring strips and masonry nails to firmly secure the lining then caulk along the joints.

Seal all the seams with a heavy duty tape. However, it is recommended not to use tapes that are not specially designed for sealing vapor barriers. When working in the basement you will be forced to contend with pipes, make the proper cuts and seal securely with tape.

The completion of your crawl space vapor barrier will be the best investment you can make in your home.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Larkwood TN.

http://crawlspacemasters.com/nashville/