The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Wooddale Knoxville don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best Crawl Space Moisture Control In Wooddale TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
Improving a Home's Indoor Air Quality by Crawl Space Encapsulation
Many homeowners try to cut costs and increase their home's comfort level by installing a crawl space vapor barrier. This will instantly make your home healthier for you and your family, and prevent moisture damage, mold, mildew, foul smells and odors.
Most homeowners tend to look at their crawl space as separate space from their home, but in reality, the two are one. Water vapors that surface from the ground are continuously entering, creating undesirable conditions for you, your family, and your home.
The purpose of a crawl space vapor barrier is to stop moisture and wetness from entering and affecting the floor and walls of your basement. Moisture tends to flow from warmer to colder spaces.
Many homeowners don't realize the importance of the proper installation, in order to keep moisture and water vapors from getting in the walls and floor of your basement-- condensation can lead to expensive structural damage. Also, if you can help control the moisture and dampness, you can greatly reduce the amount of energy required to cool and heat your home.
When considering the installation of a vapor barrier, take into consideration two spaces in your home; the crawl space and the attic. Humidity tends to build in the walls of both these areas causing mold, mildew and dry rot. This can cause severe health issues for adults and children, especially for those with asthma, breathing difficulties, and allergies. In addition, it can cause severe structural damage to your home.
Some homeowners think that because they insulate the floor joists there is no need to do any additional work, but these items do not serve the same purpose!
Tips for Installation
One of the most popular do-it-yourself vapor barrier products is polyethylene, or plastic sheeting. This plastic sheeting comes in various thicknesses; 4mm, 6mm and 10mm.
With today's technology, this product is made from a high quality material, resistant to rips and punctures. Always check the soil so there aren't any objects or materials that may damage the lining. The slightest puncture, rip or tear could compromise the entire system.
Always, make sure the space is dry before you begin any repairs. To remove the moisture, you may need a dehumidifier.
Overlap the barrier a minimum of 12 inches on the side walls. Be sure it is tight. Use furring strips and masonry nails to firmly secure the lining then caulk along the joints.
Seal all the seams with a heavy duty tape. However, it is recommended not to use tapes that are not specially designed for sealing vapor barriers. When working in the basement you will be forced to contend with pipes, make the proper cuts and seal securely with tape.
The completion of your crawl space vapor barrier will be the best investment you can make in your home.
Crawl Space Vapor Barrier - A Beginner's Guide On Buying The Right One
Crawl spaces are inherently dirty smelly places that can contain all types of unwanted odors from mold & mildew to urine & feces. Some areas of the country can even have soil underneath the home with odorless, harmful gases like radon gas. I'm a big believer that the best long-term solution to solve these problems is to encapsulate the air underneath the home with a liner system. It is a inherently impossible to keep rodents, bugs and mold out of the area underneath the home since the soil is exposed - but it is relatively simple to create a barrier between the home and crawl space the keep out all these unwanted nuisances.
I had a very nice lady write me the other day telling me about this house she had just purchased that formerly had many cats living in the crawl space and they left behind the smell of a giant litter box underneath her home. The odors were coming up through the wooden floor and creating a very fowl smell in the house. She told me she tried all different solutions: spreading baking soda, spraying an enzyme treatment originally intended for carpets & laying down new top soil - needless to say none worked. I wrote her back, apologized for her wasted time and suggested that she treat her crawl space like a wild beast that you can't defeat, only contain. She took my advise, installed a crawl space encapsulation system and the smells immediately went away.
Encapsulation systems are rated by permeability - 0.000 is the best, normal plastic is 0.01 and wood is 0.2. To stop all smells, moisture and gases look for an encapsulation liner system with a 0.000 permeability rating. A zero perm liner will also completely weatherize the crawl space and save on energy bills since the outside air won't be able to leak into the home.
Thin Liners Don't Encapsulate the Crawl Space
I can't tell you how many times I've received a call or been sent an email from a homeowner telling me how they went to Home Depot, bought a liner system as thin as a trash bag, spent an entire weekend installing it then didn't solve their problem. Cheap store bought liners are typically 6-12 mil, 0.01 permeability and even new they don't stop gases like Radon - they are also easily chewed through by bugs and rodents leaving the crawl space a year later leaking air like a sieve.
What to Look for
40 - 60 mil thickness, 0.000 permeability and antimicrobial so mildew can't grow on the liner. Encapsulation systems don't need a contractor to install (although trust me they won't tell you that). Look for the Energy Star Rated logo.
Crawl Space Masters Specializes In Crawl Space Encapsulation in Wooddale TN.