The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in The Gulch Nashville don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best Basement Waterproofing In The Gulch TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
Improving a Home's Indoor Air Quality by Crawl Space Encapsulation
I recently came across a Consumer Reports article that served as a good reminder to homeowners about some of the home's maintenance issues that are just too important to put off. With today's economy, it is easier to justify holding off on repairing a leaking basement wall crack because it seemingly does not pose an immediate threat, outside of a little inconvenience, of course.
Problems related to the foundation's structural stability or the indoor air quality of the home requires more immediate action; such issues are essentially putting the health and overall safety of the family at risk: not tomorrow, or a year from now, but at this moment.
While bad news for the homeowner, such problems are good for basement waterproofing and foundation repair contractors - the need for their services will always exist. The Consumer Reports article lists a couple of problem issues that the homeowner should be concerned about - the growth of mold and mildew and the formation of cracks in poured foundations. As a business owner who works with the basement waterproofing industry, these are two areas of concern that I am well familiar with.
The growth of mold and mildew can occur inside a home for endless reasons. The most prominent areas are basements and crawl spaces, where excess moisture is a sure bet unless the necessary measures are taken. Concrete walls are prone to the seepage of water vapor - leaking water from cracks in the foundation or the floor adds to the problem. The basement and crawl space provides the ideal environment for trapped moisture to eventually grow into mold spores and mildew.
Concrete cracks in poured foundation walls usually occur as a result of shrinkage or settling around the foundation. Cracks forming as a result of shrinkage in the concrete typically do not pose a structural threat, yet they may cause headaches for the homeowner the second they begin to leak water.
Whether such foundation cracks are structural or not, it is best not to leave them exposed for long, as it relates to the concern of the home's indoor air quality. These cracks, as well as in concrete floors, may provide an opening for soil gases. The infiltration of soil gases, in addition to the growth of mold and mildew can be enough to create an indoor air quality nightmare. The bad air circulating inside the basement and crawl space affects the entire home - 50% of the air circulating throughout the home originates from the home's lowest level.
Concrete cracking is unavoidable. Properly addressing them early on will minimize further problems down the road. Further indoor air quality concerns may also be addressed by implementing the proper waterproofing and sealing techniques throughout the basement and crawl space. There are plenty of qualified contractors throughout the United States and Canada available to service such jobs.
It's reassuring to know that our message is backed up by an objective source such as the Consumer Reports. You view the article at the provided link, http://shopping.yahoo.com/articles/yshoppingarticles/418/5-home-repairs-not-to-ignore/.
You can't put a price on the long-term stability of the home and health of the family.
Crawlspace Vapor Barrier Mythbusters
A crawl space dig out is the process of turning your crawl space into a basement. This vastly increases storage space and can, in some cases, increase living space as well.
But, a crawl space dig out can be an enormous and daunting task. And, if done improperly, it can be dangerous. If you don't want to have a professional do it for you, please follow the steps below.
To get started, find place in the outside wall of your crawl space that you can safely enter the new basement with a temporary or permanent set of steps. Make sure the wall opening is big enough to handle at least a 36-inch door, preferably making the area for the steps at least 48-inches wide.
If your soil is sandy or gravel and or may be full of water at least part of the year do not consider this procedure, it is very dangerous and you may damage or lose your house.
Make sure that prior to digging the hole for the outside exit, please build a header of sufficient size to hold the floor of the home where you will be removing the old foundation.
You need to excavate to a depth that will accommodate a four-inch concrete slab and still have at least 7-foot, 6-inches of clearance under your floor joist. It is entirely possible that you will have 48 inches of soil to remove.
When digging out a crawl space, you can not excavate any closer than 24 inches away from the existing foundation.
You can remove the soil sufficiently to work along the wall without removing the entire area you wish to change.
When you get the soil out to a depth that you prefer, pour a footer that is eight inches thick and 16 inches wide. The footer should be below the bottom of the new slab so it is a good idea to dig the area for the footer below the level you remove for the floor area. This is a very important step in a crawl space dig out.
Then, when your block is level with bottom of the old foundation wall you need to pour a four-inch thick slab of concrete on top of the wall and over to the outside existing wall.
Prior to pouring your "Cap" you must fill between the block and soil that is under the old foundation with fill sand or "Pea-gravel." Assuming that you probably have some kind of support under the center section of the floor system, you will have to provide support for the beam that is presently supporting the floor while excavate for a new footer for a steel post that will hold the floor of your new space.
Make sure your footer for this part of the project is about eight inches thick & 24 inches square.
You will need to level the floor area for your new slab and install four inches of perforated plastic pipe draining to a sub pit with an automatic sub pump that dispenses the water to the outside at least five to ten feet away from the foundation of the home. I'd suggest using "Pea-gravel" for fill under the slab but you can you fill sand also.
Now, build your stairs to the outside in a similar fashion but you need to cover it with a steel "pre-fab" unit such as a "BILCO."
If you do this correctly and maintain it, it will last for many, many years. It is strongly suggested you get a professional to do this job or at least help with it because mistakes can be dangerous and very costly.
Crawl Space Masters Specializes In Crawl Space Encapsulation in The Gulch TN.