The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Old City Knoxville don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best Clean Crawl Space In Old City TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
What to Do About Basement Waterproofing Before It's Too Late
Installing a crawlspace vapor barrier is not rocket science. It is not physically difficult. Whether installing a quality vapor barrier in a vented crawlspace or doing a complete crawlspace encapsulation, it only takes a little time, a little patience and a willingness to crawl around on your hands and knees for a couple of days.
Where to Buy a Crawlspace Vapor Barrier
There are many places to purchase a crawlspace vapor barrier. An on-line search will provide contact information many retailers. And the products they offer vary from inexpensive clear plastic to woven and coated fabrics much like swimming pool liners. The inexpensive liners can also be purchased from many hardware stores and home centers.
What Vapor Barriers Are Available
The inexpensive vapor barriers will do the job but it's been our experience that they tear easily, don't stay in place, and become brittle and crack after four to five years. But they are inexpensive.
The alternative is to spend a couple times more initially and purchase a product with a twenty five year warranty. The reinforced or woven products require no more time to install than the inexpensive shorter-lived products.
The real question is whether an installer wants to spend a couple of days crawling around in a damp crawlspace every four or five years, or wants to spend a little more initially and have an installation that is maintenance-free and will last for decades. Personally, it makes more sense to me to do it right the first time and be done with it.
Installing the Vapor Barrier
Whether doing a full crawlspace encapsulation or simply installing a vapor barrier in a vented crawl space, the installation of all products have a lot in common.
First, the floor needs to be completely covered, with all seams overlapped 6" to 12" and sealed with tape. While duct tape is a wonderful product with countless uses, it does not do a good job sealing the seams of a vapor barrier. A quality, water-proof vinyl tape designed specifically for sealing the seams is recommended.
Wrapping the Crawlspace Piers
Second, the floor material needs to be sealed around all the foundation supports. Whether steel posts or concrete block piers, it is necessary to prevent the migration of water vapor from around the foundation supports. This is usually done by wrapping the piers - sealing the piers with the vapor barrier 6" to 12" up from the floor. This provides a sealed pier to which the floor material can be sealed to using seam tape.
Wrapping the piers can be a little problematic. No safe, nonflammable, nontoxic construction adhesive is effective with the available materials except for a newly developed, patented proprietary wall and pier liner. The vapor barrier is typically applied to the piers using a combination of tape, mastic, caulk, and mechanical fasteners. The mechanical fasteners require that holes be drilled into the piers using a masonry bit and hammer drill. This adds exponentially to the installation labor.
The patented wall and pier liner can be applied to most any surface using a low VOC and nontoxic construction adhesive. Being low VOC and nontoxic, it is nonflammable and safe to use in the confined area of a crawlspace. It can be safely installed in a fraction of the time. It is the only material of its kind and can be ordered from it manufacturer.
Sealing the Crawlspace Walls
Finally, regardless of whether you're installing a vapor barrier in a vented crawlspace or doing a full encapsulation, it is necessary to seal the floor material to the crawlspace walls. Most experts agree that this is a vital step for a well installed barrier or encapsulation.
If installing a vapor barrier, the floor material should be sealed to the wall 6" to 12" above the outside grade. Like wrapping the piers, most companies recommend the tape-caulk-mechanical fastener combination. The mechanical fasteners should be placed every two to three feet long the perimeter of the crawlspace. If taking this approach, be sure to use a respirator as concrete dust can cause severe respiratory problems.
If doing a full encapsulation, the entire wall, a minimum of three inches down from the sill plate to allow for a pest control inspection, should be sealed. Enough floor material can be purchased to extend up the walls or, the method we've found easiest, the wall is covered and sealed with a wall liner and the floor material is sealed to the wall liner using seam tape. Regardless of which method you use, the vapor barrier must be securely attached and sealed to the wall.
The manufacturer of the pier wrap also makes a patented wall liner that attaches to and seals the wall in one simple step. It reduces installation time by several hours. Like the pier wrap, it is available from the manufacturer.
Crawl Space Insulation and Its Benefits
Crawl Spaces have been always around, but they became increasingly popular when homeowners started to recognize the improved convenience they have. Compared to the conventional floor setups and concrete floors, crawlspaces granted easy access to the plumbing setup and air ducts, and repairing them became effortless. Moreover, crawlspaces were also used as a storage facility. However, like any good thing in the world, crawlspaces also have its fair share of problems: trapped moisture, vermin, termites, and carpenter ants; invasion of wildlife and accumulation of foul gases to name a few.
I've been doing crawl space encapsulation business for more than two decades now. A good number of correspondences I have addressed were always concerning the foul smell and bad odors that are generated from crawlspaces. It's imperative to recognize the root causes behind such foul odors and we need to work on strategies that will eliminate the root causes. Crawlspace encapsulation is relatively a new technique which will help you to protect your crawl space, and the health of your family. However, you need to know how to choose the right encapsulation system for your home.
By encapsulating your crawl space, you no longer have to worry about rodents or other wild animals invading your crawl space, moisture accumulation, termites and foul smell that was haunting you for long. A Do-It-Yourself encapsulation kit will undisputedly help you to protect your home from unwanted disasters.
Choosing the Right Crawl Space Encapsulation System: Things to Look For:
There are four potential threats for your crawl space: mold, water, rodents and other animals. Foul smell is a result of all these elements. Your crawl space is the natural source of fresh air but when odor is generated in this area, the fresh air entering your home will also be affected. By eliminating the root causes of odor, you can significantly improve the air quality in your home.
- Liner: I receive several phone calls from disappointed customers who spent their hard-earned money on thin liners because some store owner advised them to do so. However, any liner material without 0.000 permeability and at least 20mil thickness won't help you to encapsulate the system and prevent water and radon gas entering your home.
- Water: You need a waterproof encapsulation because this will help you to prevent rain water or any other source of running water entering your crawlspace. Moreover, this will also help you to bring down the moisture level, which is a good initiative in making your crawl space unsuitable for rodents and mold.
- Dehumidifier: If you install the proper liner system, the need for a dehumidifier is greatly reduced as the purpose of removing moisture. The reason being, that a proper liner system will stop the water or moisture before it gets into the home or crawlspace, thus eliminating the need for a dehumidifier.
- Mold Neutralizer: Dehumidifiers can prevent mold growth to a large extent, but mold neutralizer destroys bacteria, algae and mold and also prevents their future growth.
These are some important factors to be considered when installing an encapsulation system for your home. You also need to consider the warranty & price offered by your store owner. Maintaining your home can be expensive, but by investing in professional encapsulating systems that will protect your home for several decades, you're making a wise investment.
Crawl Space Masters Specializes In Crawl Space Encapsulation in Old City TN.