Crawl Space Remediation North Knoxville TN

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in North Knoxville Knoxville  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

cost to encapsulate crawl space

The Best Crawl Space Insulation In North Knoxville TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

mold in crawl space under house

Crawlspace Vapor Barrier Mythbusters

Many homeowners try to cut costs and increase their home's comfort level by installing a crawl space vapor barrier. This will instantly make your home healthier for you and your family, and prevent moisture damage, mold, mildew, foul smells and odors.

Most homeowners tend to look at their crawl space as separate space from their home, but in reality, the two are one. Water vapors that surface from the ground are continuously entering, creating undesirable conditions for you, your family, and your home.

Purpose

The purpose of a crawl space vapor barrier is to stop moisture and wetness from entering and affecting the floor and walls of your basement. Moisture tends to flow from warmer to colder spaces.

Many homeowners don't realize the importance of the proper installation, in order to keep moisture and water vapors from getting in the walls and floor of your basement-- condensation can lead to expensive structural damage. Also, if you can help control the moisture and dampness, you can greatly reduce the amount of energy required to cool and heat your home.

Preparation

When considering the installation of a vapor barrier, take into consideration two spaces in your home; the crawl space and the attic. Humidity tends to build in the walls of both these areas causing mold, mildew and dry rot. This can cause severe health issues for adults and children, especially for those with asthma, breathing difficulties, and allergies. In addition, it can cause severe structural damage to your home.

Some homeowners think that because they insulate the floor joists there is no need to do any additional work, but these items do not serve the same purpose!

Tips for Installation

One of the most popular do-it-yourself vapor barrier products is polyethylene, or plastic sheeting. This plastic sheeting comes in various thicknesses; 4mm, 6mm and 10mm.

With today's technology, this product is made from a high quality material, resistant to rips and punctures. Always check the soil so there aren't any objects or materials that may damage the lining. The slightest puncture, rip or tear could compromise the entire system.

Always, make sure the space is dry before you begin any repairs. To remove the moisture, you may need a dehumidifier.

Overlap the barrier a minimum of 12 inches on the side walls. Be sure it is tight. Use furring strips and masonry nails to firmly secure the lining then caulk along the joints.

Seal all the seams with a heavy duty tape. However, it is recommended not to use tapes that are not specially designed for sealing vapor barriers. When working in the basement you will be forced to contend with pipes, make the proper cuts and seal securely with tape.

The completion of your crawl space vapor barrier will be the best investment you can make in your home.

crawl space drainage

5 Helpful Tips For When it is Time to Encapsulate Your Crawl Space

I recently came across a Consumer Reports article that served as a good reminder to homeowners about some of the home's maintenance issues that are just too important to put off. With today's economy, it is easier to justify holding off on repairing a leaking basement wall crack because it seemingly does not pose an immediate threat, outside of a little inconvenience, of course.

Problems related to the foundation's structural stability or the indoor air quality of the home requires more immediate action; such issues are essentially putting the health and overall safety of the family at risk: not tomorrow, or a year from now, but at this moment.

While bad news for the homeowner, such problems are good for basement waterproofing and foundation repair contractors - the need for their services will always exist. The Consumer Reports article lists a couple of problem issues that the homeowner should be concerned about - the growth of mold and mildew and the formation of cracks in poured foundations. As a business owner who works with the basement waterproofing industry, these are two areas of concern that I am well familiar with.

The growth of mold and mildew can occur inside a home for endless reasons. The most prominent areas are basements and crawl spaces, where excess moisture is a sure bet unless the necessary measures are taken. Concrete walls are prone to the seepage of water vapor - leaking water from cracks in the foundation or the floor adds to the problem. The basement and crawl space provides the ideal environment for trapped moisture to eventually grow into mold spores and mildew.

Concrete cracks in poured foundation walls usually occur as a result of shrinkage or settling around the foundation. Cracks forming as a result of shrinkage in the concrete typically do not pose a structural threat, yet they may cause headaches for the homeowner the second they begin to leak water.

Whether such foundation cracks are structural or not, it is best not to leave them exposed for long, as it relates to the concern of the home's indoor air quality. These cracks, as well as in concrete floors, may provide an opening for soil gases. The infiltration of soil gases, in addition to the growth of mold and mildew can be enough to create an indoor air quality nightmare. The bad air circulating inside the basement and crawl space affects the entire home - 50% of the air circulating throughout the home originates from the home's lowest level.

Concrete cracking is unavoidable. Properly addressing them early on will minimize further problems down the road. Further indoor air quality concerns may also be addressed by implementing the proper waterproofing and sealing techniques throughout the basement and crawl space. There are plenty of qualified contractors throughout the United States and Canada available to service such jobs.

It's reassuring to know that our message is backed up by an objective source such as the Consumer Reports. You view the article at the provided link, http://shopping.yahoo.com/articles/yshoppingarticles/418/5-home-repairs-not-to-ignore/.

You can't put a price on the long-term stability of the home and health of the family.


Crawl Space Masters Specializes In Crawl Space Encapsulation in North Knoxville TN.

http://crawlspacemasters.com/knoxville/