The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Gallatin Tennessee don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.
The Best crawl space water In Gallatin TN
By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.
A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.
Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.
Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.
While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.
A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.
Crawl Space Vapor Barrier Basics
Installing a crawlspace vapor barrier is not rocket science. It is not physically difficult. Whether installing a quality vapor barrier in a vented crawlspace or doing a complete crawlspace encapsulation, it only takes a little time, a little patience and a willingness to crawl around on your hands and knees for a couple of days.
Where to Buy a Crawlspace Vapor Barrier
There are many places to purchase a crawlspace vapor barrier. An on-line search will provide contact information many retailers. And the products they offer vary from inexpensive clear plastic to woven and coated fabrics much like swimming pool liners. The inexpensive liners can also be purchased from many hardware stores and home centers.
What Vapor Barriers Are Available
The inexpensive vapor barriers will do the job but it's been our experience that they tear easily, don't stay in place, and become brittle and crack after four to five years. But they are inexpensive.
The alternative is to spend a couple times more initially and purchase a product with a twenty five year warranty. The reinforced or woven products require no more time to install than the inexpensive shorter-lived products.
The real question is whether an installer wants to spend a couple of days crawling around in a damp crawlspace every four or five years, or wants to spend a little more initially and have an installation that is maintenance-free and will last for decades. Personally, it makes more sense to me to do it right the first time and be done with it.
Installing the Vapor Barrier
Whether doing a full crawlspace encapsulation or simply installing a vapor barrier in a vented crawl space, the installation of all products have a lot in common.
First, the floor needs to be completely covered, with all seams overlapped 6" to 12" and sealed with tape. While duct tape is a wonderful product with countless uses, it does not do a good job sealing the seams of a vapor barrier. A quality, water-proof vinyl tape designed specifically for sealing the seams is recommended.
Wrapping the Crawlspace Piers
Second, the floor material needs to be sealed around all the foundation supports. Whether steel posts or concrete block piers, it is necessary to prevent the migration of water vapor from around the foundation supports. This is usually done by wrapping the piers - sealing the piers with the vapor barrier 6" to 12" up from the floor. This provides a sealed pier to which the floor material can be sealed to using seam tape.
Wrapping the piers can be a little problematic. No safe, nonflammable, nontoxic construction adhesive is effective with the available materials except for a newly developed, patented proprietary wall and pier liner. The vapor barrier is typically applied to the piers using a combination of tape, mastic, caulk, and mechanical fasteners. The mechanical fasteners require that holes be drilled into the piers using a masonry bit and hammer drill. This adds exponentially to the installation labor.
The patented wall and pier liner can be applied to most any surface using a low VOC and nontoxic construction adhesive. Being low VOC and nontoxic, it is nonflammable and safe to use in the confined area of a crawlspace. It can be safely installed in a fraction of the time. It is the only material of its kind and can be ordered from it manufacturer.
Sealing the Crawlspace Walls
Finally, regardless of whether you're installing a vapor barrier in a vented crawlspace or doing a full encapsulation, it is necessary to seal the floor material to the crawlspace walls. Most experts agree that this is a vital step for a well installed barrier or encapsulation.
If installing a vapor barrier, the floor material should be sealed to the wall 6" to 12" above the outside grade. Like wrapping the piers, most companies recommend the tape-caulk-mechanical fastener combination. The mechanical fasteners should be placed every two to three feet long the perimeter of the crawlspace. If taking this approach, be sure to use a respirator as concrete dust can cause severe respiratory problems.
If doing a full encapsulation, the entire wall, a minimum of three inches down from the sill plate to allow for a pest control inspection, should be sealed. Enough floor material can be purchased to extend up the walls or, the method we've found easiest, the wall is covered and sealed with a wall liner and the floor material is sealed to the wall liner using seam tape. Regardless of which method you use, the vapor barrier must be securely attached and sealed to the wall.
The manufacturer of the pier wrap also makes a patented wall liner that attaches to and seals the wall in one simple step. It reduces installation time by several hours. Like the pier wrap, it is available from the manufacturer.
Crawl Space Insulation and Its Benefits
Encapsulating a crawl space is a common way to deal with moisture or flooding. It is also an easy way to quickly get control of the air quality in the home and lock out rodents and insects. When you're thinking about "green-ovating" your home, or simply getting control of the moisture or humidity, when you have a crawl space, you must encapsulate.
Encapsulation does a great deal for the crawlspace and for the home above.
What the process is and what it does
The practice of encapsulating or "sealing off" a crawlspace is done to lock out moisture and cut off the connection between moisture, water and the joists of a home. By running a vapor barrier down the walls of a crawlspace to completely cover the floor, you essential separate the outside from the inside of the home.
This vapor barrier will be the flexible membrane between the walls and floor and the rest of the home. A properly designed vapor barrier will limit the transfer of moisture through it, while regulating the speed at which air will naturally pass through. This helps to limit and control the amount of moisture that will find its way into the air space and completely segregate liquid water and direct it to a sump location.
5 helpful tips when having a Vapor Barrier installed in your crawlspace:
1.) Not all vapor barriers are made for this task - careful. There are many products out in the world that claim to be able to fully encapsulate a crawl space. Make sure that your vapor barrier has a low "perm" rate and that it is at least 14mil thick. If you're planning to use the space for storage make sure that a flexible sub-flooring product is also placed on top of the vapor barrier to protect it.
2.) Cover the walls too - all too often contractors forget to also encapsulate the walls of the crawl space when installing a vapor barrier. This can still allow water and moisture into the basement and therefore render the whole project useless. Take care to make sure it's installed properly.
3.) Don't use sprays. - Sealants and sprays aren't designed to be applied on the interior of the basement. They are good in many circumstances as the "first line of defense" but as the last, they can't hold the pressure and moisture trapped in a wall.
4.) Install a sump and a dehumidifier - to totally control the moisture level in the crawl space it's imperative that you have a sump pump and a dehumidifier installed. Moisture will still exist, although not to dangerous levels, but a sump will remove any liquid water your encapsulation traps, and the dehumidifier will deal with any residual moisture that naturally collects in the space.
5.) Look for the right contractor - many of the contractors who specialize in this repair are also in the basement waterproofing business. These contractors, over other general contractors, are preferred because they'll have access to more robust and dependable solutions. They also have the proper training and experience to pull the project off with little effort on your part.
Encapsulating a crawl space will limit moisture and humidity in your cellar and help lower your energy costs. Limiting moisture will help to ensure that any insulation in your floor boards will be working at their peak while keeping the cost of running any air conditioning units to a bare minimum.
Crawl Space Masters Specializes In Crawl Space Encapsulation in Gallatin TN.