encapsulate crawl space cost Bartlett, Tennessee

The crawl space has an integral role towards a home’s overall value as well as the living space above. Most homeowners in Bartlett Tennessee  don’t think twice about their crawl space unless they have to make repairs to plumbing, heating ducts or house wiring. While often thought of as no more than a storage area, it also has a tremendous impact on the overall indoor air quality of the entire home.

mold in crawl space under house

The Best crawl space mold In Bartlett TN

By default, the air quality of a crawl space is typically poor. Mold, mildew, radon gas and poor energy efficiency all create several problems. The air that circulates within it eventually makes its way up through the living space. Scientific studies show that up to 50% of living space air originates from the lowest level of the home. With homeowners more concerned about their home’s indoor air quality, the encapsulating of crawl spaces has become a popular solution for such problems.

A damp crawl space creates a safe harbor for harmful molds, in addition to dust mites, termites and other bugs that can infest the home. The presence of excessive moisture will also create a serious problem with the probability for the wooden structure of a home to deteriorate. Crawl space vents pose a further problem. While believed to be a solution to moisture problems, they, unfortunately, make the problem worse. As it turns out, the vents allow cold air and moisture in, which rises into the living area and therefore decreases the heating efficiency of the entire home.

Another all-too-common problem associated with crawl spaces is radon gas. Though it cannot be seen, smelled or tasted, radon is a radioactive gas that can contribute to poor health, including cancer. Radon gas makes its way through the earth, into the crawl space and the home’s living space. According to the U.S.E.P.A., radon gas is the number one leading cause of lung cancer in non-smokers.

Ignoring these various conditions is not recommended for both long-term health and energy usage. Fully encapsulating a crawl space – by both sealing and insulating – is a fully efficient measure in addressing such problems. It makes sense to maintain and improve the lower level area in order to maximize healthy living conditions and home resale value.

While there are several systems for encapsulating, a zero perm liner system that also insulates and reflects heat provides the most benefits. With a proper floor and wall liner, the area will not only be well insulated but will seal out moisture, bug infestation, and radon gas. Other components to look for in a system include a radon gas-dispersing drain fabric, a radon gas ventilation pipe, and a ceiling heat shield.

A complete system with all of the above components will allow any soil gasses – including radon gas – that naturally occur under the liner system, to wick through the drain fabric and escape out through the ventilation pipe. While improved indoor air quality is the primary benefit of a sealed and insulated crawl space, the homeowner will also appreciate a bright, clean, and dry storage area; the ridding of musty smells; less energy usage; and tax credits. Contractors encapsulating crawl spaces will have more to offer to their clients when they can assure the peace of mind with improved indoor air quality.

finished crawl space

How To Protect Your Health And Get Rid Of Awful Smells With Crawl Space Encapsulation

For many homeowners, the first thought in their mind when they consider installing a crawl space waterproofing system is, "But I don't go down there! Why on earth would I do that?"

Good question! And there's a great answer. While you probably don't think about your crawl space, and you may have never even seen your crawl space, it's part of your home. What happens to it has surprising effects the rest of your house.

Water can enter into your crawl space in three different ways: through the earth (or concrete) around your home, from a plumbing leak, or through the air entering your crawl space vents. Whether this moisture enters as humidity or as an all-out leak, a wet crawl space means a headache for you. Moisture collects in anything organic - including wood floorboards, support beams, and some types of crawl space insulation. As the wood swells and warps with moisture, there are nasty results: mold, rot, mildew, bacteria, and dust mites.

What you have beneath your house is no longer a crawl space. It's a habitat. The area is filled with humidity, mold spores, and dust mites. All too soon, mice, rats, snakes, and vermin will take up residence- living and dying in the dark, wet area beneath your home. And there's nothing more attractive to a termite colony looking for a new place to live than all that damp, rotting wood!

Ignore the monster lurking below while you can, but remember that even before your rotting floor and support beams are significantly damaged, you're already being affected. Warm air in your home exits the home through your upper levels, and crawl space air is sucked up into your home. As it's pulled up, nothing is stopping the humidity, mold spores, dust mite waste, and odors coming up with it. In the summer, your air conditioners will be working overtime to remove this humidity. During the winter months, cold air vented into the home hammer away at anything it can reach- including the water heater, hot water pipes, and heating ducts.

In a vented crawl space, insulation is a Catch-22. If you don't have crawl space insulation, then there's no line of defense keeping humid summer air and cold winter air away from your floorboards. If you do have crawl space insulation, then moisture and mold can saturate the material, weighing it down and causing it to collapse on to the floor. If it's wet or lying on the ground, what can it do for your home?

The first step to solving a crawl space moisture problem is to remove any standing water issues. Left in your home, it will add humidity to the home, encourage mold and mildew, and bring pests into the room while it stagnates. It simply has to go.

If your crawl space has pooling water at any time, a reliable cast-iron crawl space sump pump is the best option. Water can be directed to the sump pump via a drainage swale, or in some cases, a modern French drain system.

Humidity pours into your house through the crawl space vents, and the damp earth and cement around your home will soak up water like a sponge, releasing water vapor into the area. Cut this problem off at the source by sealing off all crawl space vents and installing a crawl space vapor barrier. Avoid cheap solutions- the kind of product you're looking for should be strong and durable- at least 20 mil thick. A quality crawl space vapor barrier will allow access for you and service workers without tearing your line of defense. Crawl space vapor barriers should also be flexible and resistant to punctures and tears, and a bed of gravel should be laid underneath to allow water to pass underneath.

crawl space definition

Crawlspace Vapor Barrier Installation

A crawl space dig out is the process of turning your crawl space into a basement. This vastly increases storage space and can, in some cases, increase living space as well.

But, a crawl space dig out can be an enormous and daunting task. And, if done improperly, it can be dangerous. If you don't want to have a professional do it for you, please follow the steps below.

To get started, find place in the outside wall of your crawl space that you can safely enter the new basement with a temporary or permanent set of steps. Make sure the wall opening is big enough to handle at least a 36-inch door, preferably making the area for the steps at least 48-inches wide.

Warning:

If your soil is sandy or gravel and or may be full of water at least part of the year do not consider this procedure, it is very dangerous and you may damage or lose your house.

Make sure that prior to digging the hole for the outside exit, please build a header of sufficient size to hold the floor of the home where you will be removing the old foundation.

You need to excavate to a depth that will accommodate a four-inch concrete slab and still have at least 7-foot, 6-inches of clearance under your floor joist. It is entirely possible that you will have 48 inches of soil to remove.

When digging out a crawl space, you can not excavate any closer than 24 inches away from the existing foundation.

You can remove the soil sufficiently to work along the wall without removing the entire area you wish to change.

When you get the soil out to a depth that you prefer, pour a footer that is eight inches thick and 16 inches wide. The footer should be below the bottom of the new slab so it is a good idea to dig the area for the footer below the level you remove for the floor area. This is a very important step in a crawl space dig out.

Then, when your block is level with bottom of the old foundation wall you need to pour a four-inch thick slab of concrete on top of the wall and over to the outside existing wall.

Prior to pouring your "Cap" you must fill between the block and soil that is under the old foundation with fill sand or "Pea-gravel." Assuming that you probably have some kind of support under the center section of the floor system, you will have to provide support for the beam that is presently supporting the floor while excavate for a new footer for a steel post that will hold the floor of your new space.

Make sure your footer for this part of the project is about eight inches thick & 24 inches square.

You will need to level the floor area for your new slab and install four inches of perforated plastic pipe draining to a sub pit with an automatic sub pump that dispenses the water to the outside at least five to ten feet away from the foundation of the home. I'd suggest using "Pea-gravel" for fill under the slab but you can you fill sand also.

Now, build your stairs to the outside in a similar fashion but you need to cover it with a steel "pre-fab" unit such as a "BILCO."

If you do this correctly and maintain it, it will last for many, many years. It is strongly suggested you get a professional to do this job or at least help with it because mistakes can be dangerous and very costly.


Crawl Space Masters Specializes In Crawl Space Encapsulation in Bartlett TN.

http://crawlspacemasters.com/tennessee/